ArcGIS Pro

Video Multiplexer Tips and Tricks

We all know how important imagery can be for spatial analysis, and a video is a simply a series of images (frames) captured at a specific rate, such as 30 frames per second. While video data contains important visual information, the application of this information in a GIS is limited unless you know when and where the video was collected.

High-performance, sophisticated systems provide video data that comes with this “when and where” metadata already embedded in the video, but lower-cost sensor systems with a GPS and a inertial measurement unit (IMU) are often deployed without embedded metadata. In order to use video data with Full Motion Video capabilities in ArcGIS, the video stream and metadata must be combined into a single compliant video file (compliant with a standard known as MISB). This can be done using the Video Multiplexer geoprocessing tool, available with the Image Analyst extension.

Input video stream and metadata
Video Multiplexer tool
Output multiplexed FMV-compliant video

The Video Multiplexer tool embeds geospatial information from a metadata file to a video to produce a geo-enabled video file, which can be visualized and used for data capture in the Full Motion Video (FMV) player. With the proper metadata, you can display the video footprint, sensor location, and look angle on your map as you play the video. You can also add features directly in your video and see them displayed on your map, or vice versa. But first, you need to make sure your video data is FMV-compliant.

You can get oriented with Video Multiplexer tool with the video multiplexer tutorial. Tutorials can be great teaching mechanisms, but in order to learn all about a workflow we sometimes need a little more than a perfect sample dataset that works like a charm. In this blog, we’ll go over some tips and tricks for working with the Video Multiplexer tool to make sure you can be successful with your own data.

Minimum Metadata Requirements

Below you will see the minimum metadata requirements to use with the Video Multiplexer tool. With this metadata, the Video Multiplexer can calculate the video frame corners, and thus the size, shape, and position of the video frame outline that can be displayed on a map. Without all of this data, there will be no way to calculate a frame outline.

 

UNIX Time Stamp Coordinated Universal Time (UTC) represented in the number of microseconds elapsed since midnight (00:00:00), January 1, 1970. Derived from the POSIX IEEE 1003.1 standard. Resolution: 1 microsecond.
Platform Heading Aircraft heading angle. Relative between longitudinal axis and True North measured in the horizontal plane. 90 represents East.
Platform Pitch Aircraft pitch angle, relative to the horizon, determined by the rotation around the side-to-side axis of the collection platform, also described as nose up or nose down. A positive angle means the aircraft is pointing above the horizon, a negative angle is pointing below the horizon.
Platform Roll Aircraft roll angle determined by the rotation around the front-to-back axis of the collection platform. This occurs when one airplane wing is higher or lower relative to the other wing.
Sensor Latitude The latitudinal position of the sensor aboard the aircraft. Based on WGS84 ellipsoid coordinate system.
Sensor Longitude  The longitudinal position of the sensor aboard the aircraft. Based on WGS84 ellipsoid coordinate system.
Sensor Altitude The height above mean sea level, in meters, of the sensor aboard the aircraft.
Horizontal Field of View Horizontal field of view of imaging sensor, in degrees.
Vertical Field of View Vertical field of view of imaging sensor, in degrees.
Sensor Relative Azimuth Relative rotation angle of sensor to platform longitudinal axis. Rotation angle between platform longitudinal axis and camera pointing direction as seen from above the platform, in degrees.
Sensor Relative Elevation Relative Elevation Angle of sensor to platform longitudinal-transverse plane. Negative angles down, in nano degrees.
Sensor Relative Roll Relative roll angle of sensor to aircraft platform. Twisting angle of camera about lens axis. Top of image is zero degrees. Positive angles are clockwise when looking from behind the camera.

 

Note:  If your sensor is secured to the airborne platform, and is not using a Gimbal, then Sensor Relative Azimuth, Elevation and Roll are not required.

The parameters above are well described in the MISB standards document. You can download the zip file titled MISP-2016.1 from the MISB website, unzip the file and look for a folder called MISP-2016.1CompositeDocuments. Within that folder is a PDF called ST0601.9.pdf, which contains a reference to all of the MISB fields supported by the FMV tool set.  It also includes descriptions of the parameters and useful diagrams.

 

The UNIX Time Stamp field

Assuming you have all the required metadata, one of the most important steps in formatting your metadata for the Multiplexer tool is making sure the Time Stamp is in UNIX Coordinated Universal Time (UTC), in microseconds, with 16 digits with no decimal places. If your time stamp is currently in human-readable format (e.g. 3/13/2018 4:15:03 PM) and you need to convert it to UNIX, you can use an online tool or an Excel formula.

For accurate results, your existing timestamps should include date and time with seconds (dd/mm/yyyy hh:mm:ss).

…using an online tool

The Epoch Converter converts human-readable timestamps to UNIX timestamps individually or in batches. Copy/paste your timestamp rows from your Excel sheet into the batch converter and choose to export the UNIX results to a CSV file. You can then simply copy/paste the new UNIX timestamps back into your metadata file.

* Note that the Epoch Converter generates results in milliseconds rather than microseconds. You must multiply the results by 1,000 to convert to microseconds, a requirement for the Multiplexer tool.

…using an Excel formula

If you don’t want to do a batch conversion or your video is too long to fit into the batch converter, you can manually calculate the UNIX timestamp in your Excel document using a simple formula. This is great if you have video frames with distinct time stamps.

  1. In your document, select a blank cell where you want to begin entering the UNIX timestamps.
  2. Type the following formula and hit Enter:
    =(A2-DATE(1970,1,1))*86400000000
  3. Be sure to modify the formula for the cell location of your first timestamp and the date you typed in.
  4. Then drag the autofill handle to the bottom of your range of timestamps or simply double-click the autofill handle to fill in the remaining values.
Use an Excel formula to convert timestamps to UNIX
Drag the autofill box down to automatically convert the remaining values

… using interpolation in Excel

If you can’t use the Excel formula method because you have multiple frames with the same time stamp, you can use an interpolation method to get a smoother, slicker video output.

  1. Create a new column in your document called “UNIX_Timestamp.” Use the Epoch Converter to convert the first and last timestamps in your document, then paste these values into the new column next to their respective records (the first and last).
  2. Subtract the first timestamp (smaller value) from the last timestamp (larger value) to get the timestamp range.
  3. Divide the timestamp range by the total number of records minus 1. For example, if there are 1000 records, divide the timestamp range by 999. This is the timestamp increment. Paste this value in a blank cell in your document. As an example, let’s say you put it in cell C2.
  4. In the UNIX_Timestamp column, click to select the second record in the column, which should be blank. Assuming your increment value is in cell C2, and your UNIX_Timestamp column is column B, type in the following formula for cell B3 (the blank cell):
    =B2+$C$2
    The $ symbol in the formula ensures that, when you get to the next step, all the remaining cells will point to the same value (in C2). Hit Enter to commit the formula for the UNIX_Timestamp cell.
  5. Drag the autofill handle from the second record to the bottom of your range of timestamps or simply double-click the autofill handle to fill in the remaining values.
Start by calculating the UNIX timestamp of the second record
Drag the autofill box down from the second record to automatically convert the remaining values

…after you converted

Make sure your UNIX timestamps have no decimal places and are not using scientific format (e.g. 1.459E+15). To do this, format the cells as “Number” and change the number of decimal places to 0.

Format the UNIX timestamps as numbers with no decimals

Other Important Odds and Ends

To wrap it  up, here are some final tips to remember when working with the Multiplexer tool:

More Resources

Want more? Here’s a great FAQ for the 10.x Full Motion Video.

Make sure you check out the Full Motion Video tutorials for guided instruction on working with geo-enabled videos in ArcGIS Pro. Happy mapping!

About the authors

Julia is a product engineer on the Raster team. She has been with Esri since 2014 and has a background in remote sensing and GIS for environmental research. In addition to image analysis, she has a passion for music, running, good food and animal welfare.

Jeff Liedtke is a PE and Documentation Lead for the Raster Team at Esri. He has a background in remote sensing, photogrammetry and image processing. Applying remote sensing techniques to provide valuable information for operational decision support applications is his passion.

Next Article

Version 430.1 of ArcGIS for AutoCAD (May 2024) adds support for AutoCAD 2025

Read this article